ماژول سوئیچ مولتی فانکشن LED القایی کابینت

Description:

It can replace the mechanical touch button. The module can realize the touch switch control and brightness adjustment of the LED light. The mechanism of the module is simple and the operation is convenient. The design circuit of the module can automatically overcome all kinds of interfaces caused by ambient temperature, humidity, surface sundries and avoid key differences caused by resistance and capacitance error. It is the perfect choice for your product development and upgrading.

Note:
The input voltage cannot be lower than 5V or higher than 24V, and 12V is the best.
The load power cannot be higher than 72W, otherwise there will be induction and the load will not act.
Do not connect the input and output inversely. IN refers to the input and OUT refers to the output, otherwise the circuit will be burnt out.

Application:
LED light bar
Advertising Light Box
Electronic Photo Album
Air Purifier
Incandescent Lamp
Tungsten Lamp
LED aluminum-based Lamp board
Flashlight
Table Lamp
Book Lamp

Specifications:
Product Name: Multi-mode touch sensor module
Induction principle: touch induction
Input voltage: DC5V-24V (recommended 12V)
Output voltage: = input voltage
Load power: 72W (MAX)
Load current: resistive 3A (MAX)
Standby current: 10-15mA
Standby power consumption: about 0.01W
Working temperature: -25°C~85°C
Output frequency: 32KHZ
Weight: 15g
Dimensions: 42 x 12 x 14mm